FSSC 22000 is a GFSI-recognised food safety certification scheme. It combines three things: ISO 22000, sector-specific prerequisite programmes (for example ISO/TS 22002-1 for food manufacturing) and additional FSSC requirements. Version 6 applies from 2023, with audits against it required from 2024.
Most delays in implementation come from not knowing what must be written down. This article sets out the documents and records a typical site needs, grouped so you can plan the work. Your exact list depends on your food chain category, products and processes, so always check it against the current scheme documents.
Documents versus records: the distinction auditors care about#
ISO 22000 uses the term "documented information" for both. In practice it helps to separate them:
- Documents state what you intend to do: policies, procedures, work instructions, the HACCP plan, specifications.
- Records prove what actually happened: monitoring logs, calibration certificates, training sheets, audit reports, corrective action forms.
An auditor will read your procedure, then ask for records showing it is followed. A beautifully written procedure with no records behind it is a common nonconformity. The reverse also happens: records exist, but no defined method explains how they should be completed.
Core food safety management system (FSMS) documents#
These form the management framework. They are required by ISO 22000 or are needed for the system to work.
| Document | What it should cover |
|---|---|
| FSMS scope | Products, processes, sites and any outsourced activities included |
| Food safety policy | Management commitment, legal compliance, communication, continual improvement |
| Objectives and plans | Measurable food safety objectives, owners, resources, timelines |
| Roles and responsibilities | Food safety team leader, team members, authority to stop production |
| Risk and opportunity assessment | FSMS-level risks, separate from product hazard analysis |
| Document and record control procedure | Approval, versioning, retention, access |
| Internal audit procedure and programme | Schedule, auditor competence, reporting |
| Management review procedure | Inputs, outputs, frequency, minutes |
| Nonconformity and corrective action procedure | Root cause analysis, action tracking, effectiveness checks |
| Competence and training procedure | Training needs, induction, evidence of effectiveness |
HACCP and hazard control documents#
This is the technical heart of the system, and where auditors spend a lot of time. Expect to document:
- Product descriptions including ingredients, packaging, intended use, shelf life and storage conditions.
- Process flow diagrams verified on site, and a plant layout showing product, people and waste flows.
- Hazard analysis covering biological, chemical, physical and allergen hazards, with the reasoning for significance decisions.
- Control measure selection showing which hazards are managed through prerequisite programmes, operational PRPs (OPRPs) or critical control points (CCPs).
- The HACCP/OPRP plan with critical limits or action criteria, monitoring methods, frequency, responsibilities and corrections.
- Validation evidence showing control measures can achieve the intended result, such as thermal process studies or supplier data.
- Verification procedures including calibration, product testing and review of monitoring records.
- Traceability, withdrawal and recall procedures with evidence of mock recall testing.
- Emergency preparedness and response procedures for events such as contamination incidents, utility failure or fire.
Keep the hazard analysis current. Any change to a recipe, supplier, line or equipment should trigger a review, and your change management procedure should say so.
Prerequisite programme (PRP) documents#
PRPs are the basic hygiene and operating conditions that make everything else reliable. The applicable technical specification depends on your sector. Food manufacturers typically use ISO/TS 22002-1, while other categories use different parts of the series. Typical PRP documents include:
- Cleaning and sanitation programme, with schedules, methods, chemicals and verification
- Pest control programme, with site maps, service reports and trend analysis
- Personal hygiene, medical screening and visitor/contractor rules
- Supplier approval and incoming material control
- Maintenance and equipment management, including hygienic design considerations
- Water, air and utilities control
- Waste management
- Storage, transport and warehousing controls
- Allergen management and cross-contamination prevention
- Control of nonconforming product, including release and disposal
- Product information and labelling controls
For each programme, aim for a procedure, a clear owner, a schedule and a record format. That four-part pattern makes audits much easier to pass through.
Additional FSSC requirements to document#
The scheme adds requirements beyond ISO 22000 and the PRPs. Which apply to you depends on your category, but a food manufacturer should expect to address areas such as:
- Food safety and quality culture: a plan with objectives, communication, training and performance measures.
- Food defense: a documented threat assessment and control measures.
- Food fraud mitigation: a vulnerability assessment and a mitigation plan.
- Allergen management: risk assessment, labelling controls and cleaning validation.
- Environmental monitoring: programme design and trend review where relevant to your process.
- Management of services and purchased materials: controls over outsourced services and supplier inputs.
- Quality control and equipment management: testing and maintenance controls.
- Food loss and waste: where applicable to the category.
- Communication and logo use: rules for how certification is referenced.
Read the current scheme requirements against your category rather than relying on a general summary. Version 6 changed details in several of these areas, so a gap assessment against the actual text is worth doing before you write anything.
Records an auditor will expect to see#
Build your record list early so formats are ready before the system goes live:
- CCP and OPRP monitoring logs and corrective action records
- Calibration and equipment verification records
- Cleaning, sanitation and pest control records
- Supplier approval files and incoming inspection results
- Training and competence records
- Internal audit reports and follow-up
- Management review minutes
- Traceability and mock recall results
- Validation and verification evidence
- Food defense and food fraud assessment reviews
A practical way to build the document set#
Start with a gap assessment against ISO 22000, your PRP standard and the FSSC additional requirements. This shows what you already have, what needs updating and what is missing. Then work in this order: policy and scope, hazard analysis and HACCP plan, PRPs, additional FSSC requirements, and finally the records and internal audit.
Avoid copying generic text without adapting it. Auditors test whether documents match what happens on the floor, so tailor each procedure to your products, equipment and people. If you want a head start, the FSSC 22000 v6 Toolkit provides editable policies, procedures, controls, checklists and worked examples, along with a gap assessment checklist, so you begin from a complete framework instead of a blank page. For a comparison with another management system, see our guide on what documents you need for ISO 9001 implementation.
Frequently asked questions#
Do we need a separate document for every FSSC 22000 requirement?#
No. Several requirements can sit within one procedure if it is clear and traceable. What matters is that each requirement is addressed, owned and evidenced by records. Separate documents often make sense for high-risk areas such as allergens, food defense and the HACCP plan.
How long should we keep records?#
Set retention periods in your record control procedure. They should cover at least the product shelf life, plus any legal, customer or scheme requirements that apply. Check the applicable rules for your market and keep the longest relevant period.
Can a small food business use the same structure?#
Yes, but scale the detail to the operation. A small site may have shorter procedures and fewer forms, but it still needs a hazard analysis, PRPs, the additional FSSC requirements that apply, and records showing they work.
If you are planning your FSSC 22000 v6 project and want to talk through the documentation, you can contact the AdWiser team.
